Field Day Macros for fldigi by KC8TVW

Note:Highlight (double click) on a call sign in the receive area then right click and choose call.
     That will put their call sign in <CALL> whenever <CALL> is referred to in the macros.
     Do the same thing for the class/section ie. 3A WPA, right click and choose QTH
     Gather those two pieces of information as soon as possible.
     I change the call sign in Configure>Operator to the club call sign if operating from the club field day site.
     A blank line at the beginning of each macro insures that my transmission starts clean on his/her receive screen.

     The same kind of call and answer macros could be set up for regular digital QSO's

     Macros 1 thru 4 are used when I initiate the contact
     Macros 9 and 10 are when I respond to CQ
     Macros 6 thru 8 are used when appropriate

Macro 1: I initate the QSO
Blank Line
<TX>
CQ FD CQ FD de <MYCALL> <MYCALL> 
CQ FD de <MYCALL> <MYCALL> 
pse K
<RX>
Label: Call CQ FD


Macro 2: I respond to someone answering my CQ, they did not send me any info but their call sign
Blank Line
<TX>
<CALL> <CALL> de <MYCALL> <MYCALL> 
pse copy 6A OH 6A OH 6a oh
BTU
<RX>
Label: Respond

Macro 3: Roger his info, thanks and close my end of QSO
Blank line
<TX>
Rgr ur <QTH>
Tnx for QSO and GL <ZDT>
<CALL> 73 de <MYCALL> sk
<RX>
Label: Final
Notes: sk means final transmission
       GL means Good Luck
       <ZDT> will print/send UTC time and date

Macro 4: Sometimes they give their info when they respond to my CQ. Response and final are combined
Blank Line
<TX>
<CALL> de <MYCALL> 
Rgr ur <QTH>
pls copy 6A OH 6A OH 6a oh
Tnx for QSO and GL <ZDT>
<CALL> 73 de <MYCALL> 
<RX>
Label: Respond Final
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

Macro 9: I respond to someone sending CQ FD - I could send my info at the same time, but most do not.
Blank Line
<TX>
<CALL> <CALL> de <MYCALL> <MYCALL> 
BTU
<RX>
Label: Ans CQ FD

Macro 10: Roger his info, send my info, thanks and close my end of QSO
Blank Line
<TX>
<CALL> <CALL> de <MYCALL> <MYCALL> 
Rgr ur <QTH>
pse copy 6A OH 6A OH 6a oh
Tnx for QSO and GL <ZDT>
<CALL> 73 de <MYCALL> 
<RX>
Label: Respond
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

Macro 6: Sometimes I already have an answering station in my log
Blank line
<TX>
<CALL> <CALL> 
Duplicate Contact
Tnx and GL
<MYCALL> 73 sk
Label: Duplicate

Macro 7: Sometimes I do not get his/her info due to interference or noise
Blank Line
Please repeat class and section
<MYCALL> 
<RX>
Label: Repeat

Macro 8: Sometimes I get a response but cannot read his call. 
Blank Line
QRZ? QRZ?
<MYCALL> 
<RX>
Label: QRZ?
Note: "QRZ?" means who is calling?

See you on the waterfall.
Steve KC8TVW